Smoke-Proof Steel Door "RS-1"

Smoke-proof steel door RS-1, tested in accordance with DIN 18095.
Single-leaf door element. Type of handling DIN right.
Galvanized and prime coated door leaf similar to RAL 9002 (grey white),
52 mm thick, rebated on 3 sides. Sheet thickness 1.0 mm. Galvanized
and prime coated corner frame similar to RAL 9002 (grey white), 2 mm thick,
with 3-sided seal and lower bottom threshold for sliding threshold seal
in the door leaf. Mortice lock with lever/knob, prepared for profile cylinder
(with tumbler insert (Bb) and 1 Bb key). Black plastic handle set.
Handle pivoted on bearing, can be used for profile cylinder and Bb key.
Smoke-proof door must be equipped with a profile cylinder. 2 security bolts.
2 two-piece hinges Top door closer in accordance with DIN EN 1154.
“Teckentrup” or equivalent.

Building authority approval:  
Tested in acc. with DIN 18095

Approved dimensions:  
Width:    625 – 1350 mm
Height:  1750 – 2500 mm
With upper  casing: 
Up to  1350 – 3500 mm

Type of handling:
( ) DIN right
( ) DIN left

Standard sizes (mm):
( ) 750 x 2000
( ) 875 x 1875 
( ) 875 x 2000 
( ) 875 x 2125 
( ) 1000 x 2000 
( ) 1000 x 2125 
( ) 1125 x 2000 
( ) 1125 x 2125 
( ) 1250 x 2000 
( ) 1250 x 2125 
( ) 1250 x 2250

( ) Special sizes:
From 625 x 1750 mm to 1350 x 2500 mm
Width: ________mm
Height:_________mm

Door leaf:
( ) Sheet thickness 1.5 mm

Special equipment frame:
( ) Block frame
( ) Counter frame
( ) Closed frame
(always counter frame for autoclaved aerated concrete walls)

Glazing:
Rectangular glazing, wire glass 7 – 8 mm thick
or round glazing with steel glass-holding strips.
Max. pane dimensions 900 x 1800 mm.

Standard glazing (mm):
( ) 140 x 820
( ) 210 x 820
( ) 335 x 820
( ) 460 x 820
( ) 585 x 820
( ) 210 x 1280
( ) 335 x 1280
( ) 460 x 1280
( ) 585 x 1280
( ) Ø 300
( ) Ø 400
( ) Ø 500
   
Special glazing:
Window section
Width: ________mm
Height:_________mm

Special equipment:
( ) Laminated safety glass 6 or 8 mm
( ) Wire plate glass 6 - 7 mm
( ) Steel cord laminated safety glass 6 mm
( ) Single-pane safety glass 6 or 8 mm
( ) Pyran glass 6.5 mm

Special equipment:  
Handle sets / Lever/Knob sets:
( ) Plastic    
( ) Light metal   
( ) Stainless steel   
( ) With short plate or
( ) With rose escutcheon
(various makes)
( ) Prepared for rose escutcheon

Locks:
( ) Profile cylinder 35.5 + 35.5 mm
( ) Panic locks
( ) Block lock (must be provided/also available)
( ) Panic bar handle
( ) Integrated door closer ITS 96

Top door closer DIN EN 1154
( ) Head assembly          
( ) With slide rail   
( ) With locking device    
( ) With smoke detector

( ) Electric door opener
( ) Integrated lock inspector (bolt contact)
( ) Integrated opening indicator (Reed contact)
( ) Revolving door drives   
( ) Hold-open devices
( ) Retractable bottom seal

* ( ) please mark

Manufacturing certificate:
Teckentrup GmbH & Co. KG
Industriestr. 50
D-33415 Verl - Sürenheide
Tel.: +49 (0) 52 46/5 04-0
Fax: +49 (0) 52 46/5 04-230
URL: http://www.teckentrup.biz
Email: info@teckentrup.biz