Fire-Resistant Sectional Door T30 "Teckentrup S"
T30 sectional steel door, tested in accordance with DIN 4102.
Made of various overlapping panel elements. Panel thickness 40 mm,
surface on both sides consisting of coated, full-surface bonded
steel plates 0.4 mm thick. Stucco design on the outer and inner surface.
Panel elements filled with mineral wool. The individual panel elements are
interconnected hinges. The hinge area is protected on the outside via
patented finger pinch protection and on the inside via cover strips.
EDPM lateral protective strips and bottom floor seal. Screwed hinges
made of galvanized steel, lateral guide roller with adjustable steel
runner rails on ball bearings guided in lateral C-shaped profiles.
Weight compensation with torsion spring shaft with lateral load-bearing
cables. Alternatively with opener or with VDS approved fire protection
drive for non-counterbalanced door.
“Teckentrup S” (approval no.: Z-6.3-1789) or equivalent.
Building authority approval:
Z-6.3-1789 tested in acc. with DIN 4102
Ordering dimensions:
Modular dimensions: ___mm width and ___mm height
Ordering details:
Wall and header thickness concrete ___mm, masonry ___mm,
autoclaved aerated concrete ___mm,
Concrete > 100 mm, masonry > 175 mm,
autoclaved aerated concrete > 200 mm and steel concrete lintel.
Headroom: ___mm (depending on the type of fitting and static requirements)
Type of fitting: Normal fitting, Winding shaft front or rear,
High lift runner rail fitting, Right or left-hand drive, Vertical fitting
Types of fitting:
N: Normal fitting **
HL: High lift runner rail fitting
VL: Vertical fitting **
** (for required space see installation drawings)
Approved dimensions:
Modular dimensions:
Width: 1000 – 5000 mm
Height: 2000 – 4700 mm
Special equipment:
( ) Woodgrain outer structure
( ) Frame panelling prime coated in RAL 9002
( ) Window with F30 glazing max.
window size 820 x 335 mm
Max. 2 windows per panel,
max. glazing surface < 2 m² per door
(lateral width min. 115 mm) with steel glass-holding strips
* ( ) please mark
Manufacturing certificate:
Teckentrup GmbH & Co. KG
Industriestr. 50
D-33415 Verl - Sürenheide
Tel.: +49 (0) 52 46/5 04-0
Fax: +49 (0) 52 46/5 04-230
URL: http://www.teckentrup.biz
Email: info@teckentrup.biz