Smoke-Proof Sectional Door RS "Teckentrup S"
Sectional steel door, tested in accordance with DIN 18095,
made of various overlapping panel elements. Panel thickness 40 mm,
surface on both sides consisting of coated, full-surface bonded
steel plates 0.4 mm thick. Stucco design on the outer and inner surface.
Panel elements filled with PUR foam. The individual panel elements are
interconnected with hinges. The hinge area is protected with patented
finger pinch protection. EPDM lateral protective strips, upper wall smoke
seal and floor seal. Screwed hinges made of galvanized steel, lateral roller
guide with adjustable steel rollers on ball bearings guided in lateral
C-shaped profiles. Weight compensation via torsion spring shaft with
lateral load-bearing cables. Alternatively also with opener or with VDS
approved fire protection drive for non-counterbalanced door.
RS “Teckentrup S” (general building authority approval no.:
3204/3393 MPA-BS) or equivalent.
Building authority approval:
General building authority approval no.: 3204/3393
MPA-BS tested in acc. with DIN 18095
Ordering dimensions:
Modular dimensions: ___mm wide and ___mm high
Ordering details:
Wall and header thickness (concrete ___mm, masonry ___mm,
autoclaved aerated concrete ___mm,
Concrete > 100 mm, masonry > 175 mm,
autoclaved aerated concrete > 150 mm and steel concrete lintel.
Headroom: ___mm (depending on the type of fitting and
static requirements)
Type of fitting: Normal fitting, Winding shaft front or rear,
High lift runner rail fitting, Right or left-hand drive, Vertical fitting
Types of fitting:
N: Normal fitting **
HL: High lift runner rail fitting
VL: Vertical fitting **
** (for required space see installation drawings)
Approved dimensions:
Modular dimensions:
Width: 1000 – 5000 mm
Height: 2000 – 4500 mm
Special equipment:
( ) Woodgrain outer structure
( ) Frame panelling prime coated in RAL 9002
( ) Window with VSG glazing, 8 mm thick
Max. window size 820 x 335 mm
Max. 2 windows per panel,
max. glazing surface < 2 m² per door
(lateral width min. 115 mm) steel glass-holding strips
* ( ) please mark
Manufacturing certificate:
Teckentrup GmbH & Co. KG
Industriestr. 50
D-33415 Verl - Sürenheide
Tel.: +49 (0) 52 46/5 04-0
Fax: +49 (0) 52 46/5 04-230
URL: http://www.teckentrup.biz
Email: info@teckentrup.biz