Prison Cell Door "Teckentrup"

Add to Text-Manager
Unity: pieces
Prison Cell Door "Teckentrup" - Standard WK 3
Prison cell door, double-skinned, smooth, 1-wing as a swing door
with steel frame, double-skinned door leaf. Hinge type DIN right.
Galvanised and prime coated door leaf/frame, grey-white similar
to RAL 9002. 64 mm thick, rebated on 4 sides. Galvanised
corner frame, 2.0 mm thick, with impact absorbing buffer in the frame,
prepared for 3-sided rotation EPDM frame seal. Without floor recess
with transport beam. Prepared for prison cell door lock provided by
the customer; lockable from one side, spyhole with pivoted cover,
concealed sliding bolt, made of flat steel bar, with an actuation handle.
2 security bolts. 2 three-part special hinges with ball bearings.                 
"Teckentrup" or equivalent. Dimensions:  
Width:    750 – 1500 mm
Height:  1750 – 2500 mm Type of handling:  
( ) DIN right
( ) DIN left Surface:  
( ) Galvanized and prime coated door leaf/frame
     similar to RAL 9002 (grey white) Special equipment Door leaf:
( ) Stainless steel safety chain (the door can be opened
     by approximately 30 cm; door protector made of
     stainless steel required on one side)
( ) Stainless steel door protector, thickness 1.5 mm, on
     one side, 185 x 835 mm (standard), for the locking
     area with safety chain
( ) Stainless steel door opener on one side / two sides
( ) Special size of door protector as per the customer’s
     requirement (width x height):
( ) Retractable bottom seal
( ) Additional security bolt  
( ) Slide seal
( ) Food hatch 260 x 200 mm (easy opening),
     (Opening angle 90°/170°), with latch lock or prepared
     for security-grade lock
( ) Food hatch with stainless steel support plate on the inside
     (for the 90° opening angle)
( ) Food hatches with or without rubber seal
( ) Food hatch with special size (width x height):
( ) Window for the 200 x 200 mm section,       
     P6B-glazing, 17 mm thick
( ) Special glazing on request
( ) Special-sized window, window section
     (Width x height): ________________
( ) Window cover as single-skinned metal plate with
     revolving door function, piano hinge with magnetic locking /
     magnetic locking with slide bolt
( ) Window cover as double-skinned metal plate with
     revolving door function, with latch or deadbolt lock
( ) Shackle hatch with revolving door function
( ) 2 mm sheet on the corridor side Special equipment frame:
( ) Prepared for bolt contact
( ) Corner frame made of galvanised sheet steel,
     3.0 mm thick, with impact absorbing buffer in the frame,              
     prepared  for 3 sided rotation, EPDM frame seal 
( ) Closed frame made of galvanised sheet steel,
     3.0 mm thick, without frame seal
( ) Counter frame made of galvanised sheet steel,               
     thickness 1.5 mm, 2.0 mm or 3.0 mm
( ) Optionally with frame seal Special equipment Fittings:
( ) Wide angle spyhole with opening/closing cover,
     standard height: 1550 mm
( ) Prepared for spyhole provided by the customer
( ) Rotating spyhole (wide angle / tablet hatch / closed)
( ) Special spyholes on request
( ) Inner sliding bolt made of flat steel 30 x 10 mm, 
     with steel actuating handle, 1 piece below the lock or
     2 pieces below and above the lock.
( ) Prepared for prison cell door lock provided by the           
     customer with locking from both sides
( ) Prepared for prison cell door lock provided by the        
     customer with mortise lock function; prepared for
     prison cell door lock provided by the customer with
     E-connection and concealed cable access point
( ) Upper door closer
( ) 3rd hinge at the centre
( ) Door stopper, floor or wall installation * ( ) please mark Manufacturing certificate:
Teckentrup GmbH & Co. KG
Industriestr. 50
D-33415 Verl - Sürenheide
Tel.: +49 (0) 52 46/5 04-0
Fax: +49 (0) 52 46/5 04-230
URL: http://www.teckentrup.biz
Email: info@teckentrup.biz