Sectional Door Aluminium Frame Construction Type SLX "Teckentrup"

Add to Text-Manager
Unity: pieces
Sectional Door Aluminium Frame Construction Type SLX "Teckentrup"
Sectional door in frame construction made of aluminium hollow profiles with
finger pinch protection. Building depth 40 mm E 6/EV 1 anodized. Aluminium-
stucco design. Insulation PUR rigid foam core, sections with 16 mm plexi-glass
panes. The sections with central seal. Header seal and floor seal and lateral
skirting board in APTK-quality. Screwed hinges made of galvanized steel, lateral
roller guide with adjustable ball bearing rollers. Weight compensation with
torsion spring shaft with lateral load-bearing cables.
"Teckentrup" or equivalent.

Ordering sizes:
Clearance dimensions:
___mm width
___mm height
= clearance dimensions

Ordering details:
Headroom: ___mm
lateral buffer right-hand ___mm, left-hand ___mm
(for required space, refer to special equipment section)

Dimensions:   
Modular dimensions
Width:  2250 – 4000 mm
Height: 1875 – 6000 mm  
(other dimensions on request)

Fitting:  
( ) N: Normal fitting
( ) ND: Normal fitting with roof incline
( ) HL: High lift runner rail fitting
( ) HLU: High lift runner rail fitting with bottom torsion spring shaft
( ) HLD:  High lift runner rail fitting with roof incline
( ) HLUD: High lift runner rail fitting with
                roof incline and bottom torsion spring shaft
( ) NSH: Low headroom fitting with rear spring shaft
( ) NSD: Low headroom fitting with roof incline
( ) VL: Vertical fitting
( ) VLU: Vertical fitting with bottomtorsion spring shaft

Special equipment:
( ) NSV : Low headroom fitting also available as roof incline fitting

Required space:
Lateral buffers:
( ) for manual operation on both sides min. 110 mm
( ) for geared chain on geared chain side. min. 185 mm
( ) for direct mount drive on drive side. min. 210 mm
( ) for chain drive on drive side. min. 150 mm
( ) for axial chain min. 165 mm

NSH/NSD/NSV:
( ) Lateral 120
( ) Geared chain 185
( ) Direct mount drive 210
( ) Chain drive 150
( ) Axial chain 165

Headroom:
( ) for N fitting
up to door height 3000 mm min. 400 mm
3010 - 5500 mm min. 450 mm
5510 - 6000 mm min. 500 mm

( ) for NS fitting
up to door width 4000 mm min. 250 mm
 
( ) for HL fitting always specify the headroom
( ) for VL min. headroom = 2 x door height + 500 mm

Drives:
( ) Manual chain hoist (geared chain)
( ) Electric drive as shaft or chain drive,
     3 x 230 V or 400 V, 50 Hz power: 0.37 kW/0.42 kW,
     degree of protection IP 44
( ) Electric drive, rail-guided, 230 V, 50 Hz
( ) Control unit: deadman, pulse with self-monitoring test
( ) Other control units possible
( ) All doors available without springs with a direct mount drive   
    (contact the manufacturer for more details)

* ( ) please mark

Manufacturing certificate:
Teckentrup GmbH & Co. KG
Industriestr. 50
D-33415 Verl - Sürenheide
Tel.: +49 (0) 52 46/5 04-0
Fax: +49 (0) 52 46/5 04-230
URL: http://www.teckentrup.biz
Email: info@teckentrup.biz